Hamilton Builders' Supply Inc. Homepage Home | About Us | Testimonials |Locations | MSDS | Links


 
   
Landscape Masonry Building Materials Tools & Supplies Concrete Specialties Seasonal Design Ideas
Concrete Supplies from Hamilton Builders Supply

Concrete Specialties - Grouts

Hamilton Builders’ Supply Inc. supplies grouts produced by W. R. MEADOWS INC. and Sika Canada. These Manufacturers design and market high quality products and systems for today’s construction professionals. Hamilton Builders’ Supply carries grouts from a basic construction grout to High Precision and High Strength Grouts for most grouting applications.

CG-86 - Construction Grade Grout CG-86 - Construction Grade Grout is a non-shrink, economical grout. It was developed as a high-strength, cost effective, general-purpose grout for use across a broad range of large and small construction projects. CG86 is pre-mixed and ready-to-use, just add water. CG-86 may be extended for deep grouting with pea gravel for greater yield and increased economy.
   
EG-96 PLUS - Epoxy Grout - Regular & Rapid Set. This epoxy grout is a 3 component, 100% solids flowable epoxy grout. Also available in a RAPID SET version where quicker turn around times are desired. It is used where a non-shrink, chemically resistant, high strength grout with good thermal shock resistance and fast cure is required. Can be used for Grouting machine base plates, pumps, valves, tanks, compressors, etc., which require precise alignment.
   
V1 - Premium Grout V1 - Premium Grout is blended under strict quality control standards for consistent, uniform, high quality. Finished appearance is similar to concrete. V1 Grout is used to grout Turbines, generators, compressors, diesel engines etc. that require high strength and vibration dampening. Can also be used for anchor bolts, sole plates, bridge bearings, conduit, dowels, sleeves, hangers, pipes, lighting standards anywhere that you need high early strength and where reduced down time is important.
   
V3 - Precision Grout is blended under strict quality control standards for consistent, uniform, high quality. Finished appearance is similar to concrete. V3 Grout is used to grout. V3 Grout is used for anchor bolts, sole plates, bridge bearings, conduit, dowels, sleeves, hangers, pipes, lighting standards, guard rails anywhere that you need high early strength and where reduced down time is important.
   
Application for grouts:
Clean grout contact surfaces of oil, grease, scale, dirt and other foreign matter. Chip away unsound concrete, leaving the surface level but rough, saturate all surfaces by flooding with water for a period of 3 to 12 hours. Use minimum water necessary to produce mix consistency desired. Detailed instructions are shown on bag. Place by damp-packing, pumping, pouring, rodding, strapping, chaining or vibrating.

Sika Construction Products

Sika offers a wide range of products to the construction industry in the fields of anchoring and grouting. The products generally fall into one of two categories, either resin based or cementitious based systems. Depending on the needs of the customer and the technical requirements, Sika offers the right product for the right application.

Sika offers the right product for the right application

Sika 212 Sika 212 Grout is a non-shrink, cement-based grout. It is non-metallic and contains no chloride. With a special blend of shrinkage-reducing and plasticizing/water-reducing agents, Sika 212 Grout compensates for shrinkage in both the plastic and hardened states. A structural grout, Sika 212 Grout provides the advantage of multiple fluidity with a single component.
   
M-Bed Grout, is a Non-Shrink, Gassing, Cementitious Grout which is an economical, general purpose, non-shrink grout that can be used for the installation of anchor bolts, machine equipment base plates, column sole plates, etc.
   
Sika 42 Grout Pak Sika 42 Grout Pak, Pre-Proportioned, Epoxy Base Plate, Grouting System, Sika 42 Grout Pak is a three-component, solvent-free, moisture-inensitive, epoxy grouting system to seat base plates and Seat base plates for light and heavy machinery